To Next Page

To Previous Page

Figure 44 Configuring port security for the other four security modes (mac-else-userlogin-secure is

taken for example)

Table 45 Configuration items

Item Descri

tion

Port Mode

• mac-else-userlogin-secure—This mode is the combination of the

mac-authentication and userlogin-secure modes, with MAC authentication

having a higher priority. Upon receiving a non-802.1X frame, a port in this mode

performs only MAC authentication. Upon receiving an 802.1X frame, the port

performs MAC authentication and then, if MAC authentication fails, 802.1X

authentication.

• mac-else-userlogin-secure-ext—This mode is similar to the

mac-else-userlogin-secure mode, except that it supports multiple 802.1X and

MAC authentication users on the port.

• userlogin-secure-or-mac—This mode is the combination of the userlogin-secure

and mac-authentication modes, with 802.1X authentication having a higher

priority. For a wireless user, 802.1X authentication is performed first. If 802.1X

authentication fails, MAC authentication is performed.

• userlogin-secure-or-mac-ext—This mode is similar to the

userlogin-secure-or-mac mode, except that it supports multiple 802.1X and MAC

authentication users on the port.

Max User

Control the maximum number of users allowed to access the network through the

port.

Mandatory Domain

Select an existing domain from the list. After a mandatory domain is configured, all

802.1X users accessing the port are forced to use the mandatory domain for

authentication, authorization, and accounting.

The default domain is system. To create a domain, select Authentication > AAA from

the navigation tree, click the Domain Setup tab, and type a new domain name in the

Domain Name field.

Other manuals for HP MSR SERIES

Questions and Answers:

Need help?

Do you have a question about the HP MSR SERIES and is the answer not in the manual?

General