HP MSR SERIES User Manual

82
Table 53 Client RSSI
Field Descri
p
tion
Client RSSI
—Indicates that 0 < RSSI <= 20.
—Indicates that 20 < RSSI <= 30.
—Indicates that 30 < RSSI <= 35.
—Indicates that 35 < RSSI <= 40.
—Indicates that 40 < RSSI.
Table 54 Field description
Field Descri
p
tion
MAC address MAC address of the client.
AID Association ID of the client.
User Name
Username of the client:
• The field is displayed as -NA- if the client adopts
plain-text authentication or cipher-text authentication
with no username.
• The field is irrelevant to the portal authentication
method. If the client uses the portal authentication
method, the field does not display the portal username
of the client.
Radio Interface WLAN radio interface.
SSID SSID of the device.
BSSID MAC address of the device.
Port WLAN-DBSS interface associated with the client.
VLAN Number of the VLAN interface to which the client belongs.
State State of the client such as running.
Power Save Mode Client’s power save mode: active or sleep.
Wireless Mode Wireless mode such as 802.11b, 802.11g, 802.11gn.
QoS Mode Whether the device supports the WMM function.
Listen Interval (Beacon Interval)
Number of times the client has been activated to listen to
beacon frames.
RSSI
Received signal strength indication. This value indicates
the client signal strength detected by the AP.
SNR Signal to Noise Ratio.
Rx/Tx Rate Reception/transmission rate of the last frame.
Client Type Client type such as RSN, WPA, or Pre-RSN.
Authentication Method Authentication method such as open system or shared key.
AKM Method AKM suite used such as Dot1X or PSK.

HP MSR SERIES Specifications

General

Brand	HP
Model	MSR SERIES
Category	Network Router
Language	English