91
Figure 74 The Storm Constrain tab
NOTE:
The traffic statistics generating interval set here is the interval used by the storm constrain function for
measuring traffic against the traffic thresholds. It is different from the interval set in the flow interval
module, which is used for measuring the average traffic sending and receiving rates over a specific
interval.
For network stability sake, set the traffic statistics
interval for the storm constrain function to
the default or a greater value.
Configuring storm constrain
Select Device > Storm Constrain from the navigation tree to enter the page shown in Figure 74. In the Port
Storm Constrain area, the configured port storm constrain settings are displayed. Click Add to enter the
page for adding port storm constrain configuration, as shown in Figure 75.
To Next Page
Loading...
Need help?
General
