HP V1910 Switch Series User Manual

121
Table 44 Configuration items for configuring an SNMP community
Item Descri
p
tion
Community Name Set the SNMP community name.
Access Right
Configure SNMP NMS access right
 Read only—The NMS can perform read-only operations to the MIB objects when it
uses this community name to access the agent,
 Read and write—The NMS can perform both read and write operations to the MIB
objects when it uses this community name to access the agent.
View
Specify the view associated with the community to limit the MIB objects that can be
accessed by the NMS.
ACL
Associate the community with a basic ACL to allow or prohibit the access to the agent
from the NMS with the specified source IP address.
Return to SNMPv1 or SNMPv2c configuration task list.
Configuring an SNMP group
1. Select Device > SNMP from the navigation tree.
2. Click the Group tab to enter the page as shown in Figure 104.
3. Click Add to enter the Add SNMP Group page as shown in Figure 105.
Figure 104 SNMP group
Figure 105 Create an SNMP group

HP V1910 Switch Series Specifications

General

Brand	HP
Model	V1910 Switch Series
Category	Switch
Language	English