5
 Configure—Users of this level can access device data and configure the device, but they cannot
upgrade the host software, add/delete/modify users, or back up/restore configuration files.
 Management—Users of this level can perform any operations to the device.
Introduction to the web-based NM functions
NOTE:
User level in Table 2 indicates that users of this level or users of a higher level can perform the
corresponding operations.
Table 2 Description of Web-based NM functions
Function menu Descri
Wizard IP Setup
Allows you to perform quick configuration of the
device.
Management
IRF
Setup
Displays global settings and port settings of a
stack.
Configure
Allows you to configure global parameters and
stack ports.
Management
Topology
Summary
Displays the topology summary of a stack. Configure
Device
Summary
Displays the control panels of stack members. Configure
Summary
System
Information
Displays the basic system information, system
resource state, and recent system operation logs.
Monitor
Device
Information
Displays the port information of the device. Monitor
Devi
ce
Basic
System Name
Displays and allows you to configure the system
name.
Configure
Web Idle
Timeout
Displays and allows you to configure the idle
timeout period for logged-in users.
Configure
Device
Maintenan
ce
Software
Upgrade
Allows you to configure to upload upgrade file
from local host, and upgrade the system software.
Management
Reboot Allows you to configure to reboot the device. Management
Electronic Label Displays the electronic label of the device. Monitor
Diagnostic
Information
Generates diagnostic information file, and allows
you to view or save the file to local host.
Management
System
Time
System Time
Displays and allows you to configure the system
date and time.
Configure
Syslog
Loglist
Displays and refreshes system logs. Monitor
Allows you to clear system logs. Configure
Loghost Displays and allows you to configure the loghost. Configure
Log Setup
Displays and allows you to configure the buffer
capacity, and interval for refreshing system logs.
Configure