tion
Secondary Server UDP Port
Specify the UDP port of the secondary server.
If the IP address of the secondary server is not specified or the specified IP
address is to be removed, the port number is 1812 for authentication or 1813
for accounting.
Secondary Server Status
Status of the secondary server, including:
active: The server is working normally.
blocked: The server is down.
If the IP address of the secondary server is not specified or the specified IP
address is to be removed, the status is blocked.
Return to RADIUS configuration task list.
Configuring RADIUS parameters
From the navigation tree, select Authentication > RADIUS and then select the RADIUS Setup tab to enter
the RADIUS parameter configuration page, as shown in Figure 333.
Figure 333 RADIUS parameter configuration
To Next Page
Loading...
