HP V1910 Switch Series User Manual

224
Item Descri
p
tion
Network Device Address
and network device address.
When configuring the network device address, select the
address information type from the drop-down list, type the
address information in the text box below and click Add next to
the text box to add the information to the address information
list below. To remove an address information entry, select the
entry from the list, and click Delete. The civic address
information can include language, province/state, country,
city, street, house number, name, postal/zip code, room
number, post office box, and if necessary, additional
information.
Return to LLDP configuration task list.
Configuring global LLDP setup
Select Network > LLDP from the navigation tree and click the Global Setup tab to enter the page shown
in Figure 189.
Figure 189 The Global Setup tab
Table 96 Global LLDP setup configuration items
Item Descri
p
tion
LLDP Enable Select from the drop-down list to enable or disable global LLDP.

HP V1910 Switch Series Specifications

General

Product Series	V1910
VLAN Support	Yes
QoS	Yes
Ports	8, 24, or 48 10/100/1000 ports
MAC Address Table Size	8K entries
Power Supply	Internal power supply
Jumbo Frame Support	Yes
Operating Humidity	10% to 90% (non-condensing)