HP V1910 Switch Series User Manual

249
Task Remarks
Configuring IGMP snooping
port functions
Optional
Configure the maximum number of multicast groups allowed and the fast leave
function for ports in the specified VLAN.
IMPORTANT:
 IGMP snooping must be enabled globally before IGMP snooping can be
enabled on a port.
 IGMP snooping configured on a port takes effect only after IGMP snooping
is enabled in the VLAN.
Display IGMP snooping
multicast entry information
Optional
Enabling IGMP snooping globally
Select Network > IGMP Snooping in the navigation tree to enter the basic configuration page shown in
Figure 213.
Figure 213 Basic IGMP snooping configurations
Table 100 IGMP snooping configuration items
Item Descri
p
tion
IGMP snooping Globally enable or disable IGMP snooping.
Return to Configuration task list.
Configuring IGMP snooping in a VLAN
Select Network > IGMP Snooping in the navigation tree to enter the basic configuration page shown in
Figure 213. Click the
icon corresponding to the VLAN to enter the page you can configure IGMP
snooping in the VLAN, as shown in Figure 214.

HP V1910 Switch Series Specifications

General

Product Series	V1910
VLAN Support	Yes
QoS	Yes
Ports	8, 24, or 48 10/100/1000 ports
MAC Address Table Size	8K entries
Power Supply	Internal power supply
Jumbo Frame Support	Yes
Operating Humidity	10% to 90% (non-condensing)