Displaying LLDP
information received from
LLDP neighbors
Optional
You can display the LLDP information received from LLDP neighbors.
NOTE:
LLDP-related configurations made in Ethernet interface view takes effect only on the current port, and those
made in port group view takes effect on all ports in the current port group.
Enabling LLDP on ports
Select Network > LLDP from the navigation tree to enter the Port Setup tab, as shown in Figure 186.
This tab displays the LLDP status and operating mode on a port. Select one or more ports and click
Enable beneath the port list to enable LLDP on them.
To disable LLDP on a port, select the port and click Disable.
To Next Page
Loading...
Need help?
General