HP V1910 Switch Series User Manual

Item Descri
p
tion
Username Format
Set the format of username sent to the RADIUS server.
A username is generally in the format of userid@isp-name, of which
isp-name is used by the device to determine the ISP domain to which
a user belongs. If a RADIUS server does not accept a username
including an ISP domain name, you can configure the device to
remove the domain name of a username before sending it to the
RADIUS server.
without-domain: Specifies to remove the domain name of a
username that is to be sent to the RADIUS server.
with-domain: Specifies to keep the domain name of a username that
is to be sent to the RADIUS server.
Unit of Data Flows
Specify the unit for data flows sent to the RADIUS server, which can
be:
 byte
 kilo-byte
 mega-byte
 giga-byte
Unit of Packets
Specify the unit for data packets sent to the RADIUS server, which
can be
 one-packet
 kilo-packet
 mega-packet
 giga-packet
Table 132 Relationship between the real-time accounting interval and the number of users
Number of users Real-time accountin
g
interval (in minutes)
1 to 99 3
100 to 499 6
500 to 999 12

1000

15
Return to RADIUS configuration task list.
RADIUS configuration example
Network requirements
As shown in Figure 334, configure the switch to let the RADIUS server authenticate and keep accounts on
the user (record the online duration of the Telnet user).
On the RADIUS server (a CAMS or iMC server, using the default port for authentication and accounting),
the Telnet user’s username and password and the shared key expert have been configured for packet
exchange with the switch.
On the switch, it is required to configure the shared key for packet exchange with the RADIUS server as
expert, and configure the system to remove the domain name of a username before sending it to the
RADIUS server.

HP V1910 Switch Series Specifications

General

Brand	HP
Model	V1910 Switch Series
Category	Switch
Language	English