HP V1910 Switch Series User Manual

436
Figure 408 The page for configuring DSCP to DSCP mapping table
Return to Priority mapping table configuration task list.
Configuring priority trust mode on a port
Select QoS > Port Priority from the navigation tree to enter the page shown in Figure 409. Click the
icon corresponding to a port to enter the page shown in Figure 410.

HP V1910 Switch Series Specifications

General

Product Series	V1910
VLAN Support	Yes
QoS	Yes
Ports	8, 24, or 48 10/100/1000 ports
MAC Address Table Size	8K entries
Power Supply	Internal power supply
Jumbo Frame Support	Yes
Operating Humidity	10% to 90% (non-condensing)