Vendor-Data—Indicates the contents of the sub-attribute.
Figure 331 Segment of a RADIUS packet containing an extended attribute
Protocols and standards
RFC 2865, Remote Authentication Dial In User Service (RADIUS)
RFC 2866, RADIUS Accounting
RFC 2867, RADIUS Accounting Modifications for Tunnel Protocol Support
RFC 2868, RADIUS Attributes for Tunnel Protocol Support
RFC 2869, RADIUS Extensions
Configuring RADIUS
Configuration task list
NOTE:
The RADIUS scheme configured through the web interface is named system.
If there is no RADIUS scheme named system in the system, when you select Authentication > RADIUS
to enter the RADIUS module, a scheme named system is created automatically.
Table 129 RADIUS configuration task list
Task Descri
Configuring RADIUS
authentication servers
Required
Configure the information related to the primary and
secondary RADIUS authentication servers.
By default, no RADIUS authentication server is configured.
For more
information, see
“Configuring
RADIUS servers.”
Configuring RADIUS
accounting servers
Optional
Configure the information related to the primary and
secondary RADIUS accounting servers.
By default, no RADIUS accounting server is configured.
Configuring RADIUS
parameters
Required
Configure the parameters that are necessary for information exchange between the
device and RADIUS servers.
To Next Page
Loading...
Need help?
General