HP V1910 Switch Series User Manual

83
Table 24 Super password configuration items
Item Descri
p
tion
Create/Remove
Select the operation type.
Options include:
 Create: Configure or modify the super password.
 Remove: Remove the current super password.
Password Set the password for non-management level users to switch to the management level.
Confirm Password
Input the same password again. Otherwise, the system will prompt that the two
passwords input are not consistent when you apply the configuration.
Password Display
Mode
Set the password displaying mode.
Options include:
 Simple: Saves the password in the configuration file in plain text so that the password
is displayed in plain text.
 Cipher: Saves the password in the configuration file in cipher text so that the
password is displayed in cipher text.
A plaintext password is not safe. It is good practice to use the cipher mode.
Switching to the management level
This function allows a user to switch from the current user level to the management level. To switch to the
management level, a user must provide the correct super password.
The access level switchover of a user is valid for the current login only; it does not change the access level
configured for the user. When the user re-logs in to the Web interface, the access level of the user is still
the original level.
To switch to the management level, select Device > Users from the navigation tree, click the Switch To
Management tab, input the correct super password, and click Login.
Figure 68 Switch to the management level.

HP V1910 Switch Series Specifications

General

Brand	HP
Model	V1910 Switch Series
Category	Switch
Language	English