HP V1910 Switch Series - Configuring Service Management

292
Configuring service management
Select Network > Service from the navigation tree to enter the service management configuration page,
as shown in Figure 259.
Figure 259 Service management
Table 113 Service management configuration items
Item Descri
p
tion
FTP
Enable FTP
service
Specify whether to enable the FTP service.
The FTP service is disabled by default.
ACL
Associate the FTP service with an ACL. Only the clients that pass the ACL
filtering are permitted to use the FTP service.
You can view this configuration item by clicking the expanding button in
front of FTP.
Telnet
Enable Telnet
service
Specify whether to enable the Telnet service.
The Telnet service is disabled by default.
SSH
Enable SSH
service
Specify whether to enable the SSH service.
The SSH service is disabled by default.
SFTP
Enable SFTP
service
Specify whether to enable the SFTP service.
The SFTP service is disabled by default.
IMPORTANT:
When you enable the SFTP service, the SSH service must be enabled.
HTTP
Enable HTTP
service
Specify whether to enable the HTTP service.
The HTTP service is enabled by default.