HP V1910 Switch Series - Log Management Configuration; Configuration Task List; Configuring Log Management; Setting Syslog Related Parameters

52
Log management configuration
System logs contain a large amount of network and device information, including running status and
configuration changes. System logs are an important way for administrators to know network and device
status. With system log information, administrators can take corresponding actions against network
problems and security problems.
System logs can be stored in the log buffer, or sent to the loghost.
Configuring log management
Configuration task list
Perform the tasks in Table 13 to configure log management.
Table 13 Log management configuration task list
Task Descri
p
tion
Setting syslog related parameters
Optional
 Set the number of logs that can be stored in the log buffer.
 Set the refresh period of the log information displayed on the
web interface.
Displaying syslog Display detailed information of system logs.
Setting loghost
Optional
Set the loghost that can receive system logs.
Setting syslog related parameters
Select Device > Syslog from the navigation tree, and click the Log Setup tab to enter the syslog
configuration page, as shown in Figure 38.