Manual: Allows you to specify an IPv4 address and a mask length.
IMPORTANT:
Support for IPv4 obtaining methods depends on the device model.
IPv4
address
Specify an IPv4 address and the mask length for the VLAN interface.
These two text boxes are configurable if Manual is selected.
MaskLen
Finishing configuration wizard
After finishing the management IP address configuration, click Next, as shown in Figure 19.
Figure 19 Configuration finishes
The page displays your configurations. Review the configurations and if you want to modify the settings
click Back to go back to the page. Click Finish to confirm your settings and the system performs the
configurations.
To Next Page
Loading...
