System Capabilities
Select to include the system capabilities TLV in transmitted
LLDPDUs.
System Description
Select to include the system description TLV in transmitted
LLDPDUs.
System Name Select to include the system name TLV in transmitted LLDPDUs.
Management Address
Select to include the management address TLV in transmitted
LLDPDUs and in addition, set the management address and its
format (a numeric or character string in the TLV).
If no management address is specified, the main IP address of
the lowest VLAN carried on the port is used. If no main IP
address is assigned to the VLAN, 127.0.0.1 is used.
DOT1 TLV
Setting
Port VLAN ID Select to include the PVID TLV in transmitted LLDPDUs.
Protocol VLAN ID
Select to include port and protocol VLAN ID TLVs in transmitted
LLDPDUs and specify the VLAN IDs to be advertised.
If no VLAN is specified, the lowest protocol VLAN ID is
transmitted.
VLAN Name
Select to include VLAN name TLVs in transmitted LLDPDUs and
specify the VLAN IDs to be advertised.
If no VLAN is specified, the lowest VLAN carried on the port is
advertised.
DOT3 TLV
Setting
Link Aggregation
Select to include the link aggregation TLV in transmitted
LLDPDUs.
MAC/PHY
Configuration/Status
Select to include the MAC/PHY configuration/status TLV in
transmitted LLDPDUs.
Maximum Frame Size
Select to include the maximum frame size TLV in transmitted
LLDPDUs.
Power via MDI Select to include the power via MDI TLV in transmitted LLDPDUs.
MED TLV
Setting
LLDP-MED Capabilities
Select to include the LLDP-MED capabilities TLV in transmitted
LLDPDUs.
Inventory
Select to include the hardware revision TLV, firmware revision
TLV, software revision TLV, serial number TLV, manufacturer
name TLV, model name TLV and asset ID TLV in transmitted
LLDPDUs.
Network Policy Select to include the network policy TLV in transmitted LLDPDUs.
Extended Power-via-MDI
Capability
Select to include the extended power-via-MDI TLV in transmitted
LLDPDUs.
Emergency Number
Select to encode the emergency call number in the location
identification TLV in transmitted LLDPDUs and set the emergency
call number.
Address
Select Address to encode the civic address information of the
network connectivity device in the location identification TLV in
transmitted LLDPDUs. In addition, set the device type, which can
be a DHCP server, switch or LLDP-MED endpoint, country code,
To Next Page
Loading...
Need help?
General
