Configurati
on
Backup
Allows you to back up the configuration file to be
used at the next startup from the device to the host
of the current user.
Management
Restore
Allows you to upload the configuration file to be
used at the next startup from the host of the current
user to the device.
Management
Save
Allows you to save the current configuration to the
configuration file to be used at the next startup.
Configure
Initialize Allows you to restore the factory default settings. Configure
File
Managem
ent
File
Management
Allows you to manage files on the device, such as
displaying the file list, downloading a file,
uploading a file, and removing a file.
Management
Port
Managem
ent
Summary Displays port information by features. Monitor
Detail Displays feature information by ports. Monitor
Setup
Allows you to create, modify, delete, and
enable/disable a port, and clear port statistics.
Configure
Port
Mirroring
Summary
Displays the configuration information of a port
mirroring group.
Monitor
Create Allows you to create a port mirroring group. Configure
Remove Allows you to remove a port mirroring group. Configure
Modify Port
Allows you to configure ports for a mirroring
group.
Configure
Users
Summary
Displays the brief information of FTP and Telnet
users.
Monitor
Super Password
Allows you to configure a password for a
lower-level user to switch from the current access
level to the management level.
Management
Create Allows you to create an FTP or Telnet user. Management
Modify
Allows you to modify FTP or Telnet user
information.
Management
Remove Allows you to remove an FTP or a Telnet user. Management
Switch To
Management
Allows you to switch the current user level to the
management level.
Visitor
Loopback Loopback
Allows you to perform loopback tests on Ethernet
interfaces.
Configure
VCT VCT
Allows you to check the status of the cables
connected to Ethernet ports.
Configure
Flow
Interval
Port Traffic
Statistics
Displays the average rate at which the interface
receives and sends packets within a specified time
interval.
Monitor
Interval
Configuration
Allows you to set an interval for collecting traffic
statistics on interfaces.
Configure
To Next Page
Loading...
