Displays and allows you to set the interval for
collecting storm constrain statistics.
Displays, and allows you to create, modify, and
remove the port traffic threshold.
Configure
RMON
Statistics
Displays, and allows you to create, modify, and
clear RMON statistics.
Configure
History
Displays, and allows you to create, modify, and
clear RMON history sampling information.
Configure
Alarm
Allows you to view, create, modify, and clear
alarm entries.
Configure
Event
Allows you to view, create, modify, and clear event
entries.
Configure
Log Displays log information about RMON events. Configure
Energy
Saving
Energy Saving
Displays and allows you to configure the energy
saving settings of an interface.
Configure
SNMP
Setup
Displays and refreshes SNMP configuration and
statistics information.
Monitor
Allows you to configure SNMP. Configure
Community
Displays SNMP community information. Monitor
Allows you to create, modify and delete an SNMP
community.
Configure
Group
Displays SNMP group information. Monitor
Allows you to create, modify and delete an SNMP
group.
Configure
User
Displays SNMP user information. Monitor
Allows you to create, modify and delete an SNMP
user.
Configure
Trap
Displays the status of the SNMP trap function and
information about target hosts.
Monitor
Allows you to enable or disable the SNMP trap
function, or create, modify and delete a target host.
Configure
View
Displays SNMP view information. Monitor
Allows you to create, modify and delete an SNMP
view.
Configure
Interface
Statistics
Interface
Statistics
Displays and allows you to clear the statistics
information of an interface.
Configure
Net
To Next Page
Loading...
Need help?
General
