HP V1910 Switch Series User Manual

229
Field Descri
p
tion
Device class
MED device type:
 Connectivity device—An intermediate device that provide network
connectivity.
 Class I—a generic endpoint device. All endpoints that require the
discovery service of LLDP belong to this category.
 Class II—A media endpoint device. The class II endpoint devices support
the media stream capabilities in addition to the capabilities of generic
endpoint devices.
 Class III—A communication endpoint device. The class III endpoint
devices directly support end users of the IP communication system.
Providing all capabilities of generic and media endpoint devices, Class III
endpoint devices are used directly by end users.
Media policy type
Available options include:
 Unknown
 Voice
 Voice signaling
 Guest voice
 Guest voice signaling
 Soft phone voice
 Videoconferencing
 Streaming video
 Video signaling
Unknown Policy Indicates whether or not the media policy type is unknown.
VLAN tagged Indicates whether or not packets of the media VLAN are tagged.
Media policy VlanID ID of the media VLAN.
Media policy L2 priority Layer 2 priority.
Media policy Dscp DSCP precedence.
HardwareRev Hardware version of the neighbor.
FirmwareRev Firmware version of the neighbor.
SoftwareRev Software version of the neighbor.
SerialNum The serial number advertised by the neighbor.
Manufacturer name The manufacturer name advertised by the neighbor.
Model name The model name advertised by the neighbor.
Asset tracking identifier
Asset ID advertised by the neighbor. This ID is used for the purpose of
inventory management and asset tracking.
PoE PSE power source
The type of PSE power source advertised by the neighbor:
 Primary
 Backup

HP V1910 Switch Series Specifications

General

Product Series	V1910
VLAN Support	Yes
QoS	Yes
Ports	8, 24, or 48 10/100/1000 ports
MAC Address Table Size	8K entries
Power Supply	Internal power supply
Jumbo Frame Support	Yes
Operating Humidity	10% to 90% (non-condensing)