HP V1910 Switch Series User Manual

257
# Enable the fast leave function for GigabitEthernet 1/0/3.
 Click the Advanced tab.
Figure 223 Configure IGMP snooping on GigabitEthernet 1/0/3
 Select GigabitEthernet 1/0/3 from the Port drop-down list.
 Type the VLAN ID 100.
 Select the Enable radio button for Fast Leave.
 Click Apply to complete the operation.
Configuration verification
# Display the IGMP snooping multicast entry information on Switch A.
 Select Network > IGMP Snooping in the navigation tree to enter the basic configuration page.
 Click the plus sign (+) in front of Show Entries in the basic VLAN configuration page to display
information about IGMP snooping multicast entries, as shown in Figure 224.
Figure 224 IGMP snooping multicast entry information displaying page
 Click the icon corresponding to the multicast entry (0.0.0.0, 224.1.1.1) to view information about
this entry, as shown in Figure 225.

HP V1910 Switch Series Specifications

General

Product Series	V1910
VLAN Support	Yes
QoS	Yes
Ports	8, 24, or 48 10/100/1000 ports
MAC Address Table Size	8K entries
Power Supply	Internal power supply
Jumbo Frame Support	Yes
Operating Humidity	10% to 90% (non-condensing)