HP V1910 Switch Series - Page 303

289
Figure 256 Configure DHCP snooping functions on GigabitEthernet 1/0/1
 Click on the Trust radio button next to Interface State.
 Click Apply.
# Configure DHCP snooping functions on GigabitEthernet 1/0/2.
 Click the
icon of GigabitEthernet 1/0/2 on the interface list. Perform the following operations
on the DHCP Snooping Interface Configuration page shown in Figure 257.
Figure 257 Configure DHCP snooping functions on GigabitEthernet 1/0/2
 Click on the Untrust radio button for Interface State.
 Click on the Enable radio button next to Option 82 Support.
 Select Replace for Option 82 Strategy.
 Click Apply.
# Configure DHCP snooping functions on GigabitEthernet 1/0/3.
 Click the
icon of GigabitEthernet 1/0/3 on the interface list. Perform the following operations
on the DHCP Snooping Interface Configuration page shown in Figure 258.