304
Select Network > VLAN Interface from the navigation tree, click the Create tab, and then perform
the following operations, as shown in Figure 273.
Figure 273 Create VLAN-interface 100
Type 100 for VLAN ID.
Select the Configure Primary IPv4 Address checkbox.
Click on the Manual radio botton.
Type 192.168 .1.2 for IPv4 Address.
Select 24 (255.255.255.0) for Mask Length.
Click Apply to complete the configuration.
# Create a static ARP entry.
Select Network > ARP Management from the navigation tree to enter the default ARP Table page.
Click Add Perform the following operations, as shown in Figure 274.
To Next Page
Loading...
