HP V1910 Switch Series User Manual

350
Figure 322 Configure a local user
 Enter telnet as the username.
 Select Management as the access level.
 Enter abcd as the password.
 Enter abcd to confirm the password.
 Select Telnet Service as the service type.
 Click Apply.
# Configure ISP domain test.
 Select Authentication > AAA from the navigation tree. The domain configuration page appears, as
shown in Figure 323.

HP V1910 Switch Series Specifications

General

Product Series	V1910
VLAN Support	Yes
QoS	Yes
Ports	8, 24, or 48 10/100/1000 ports
MAC Address Table Size	8K entries
Power Supply	Internal power supply
Jumbo Frame Support	Yes
Operating Humidity	10% to 90% (non-condensing)