HP V1910 Switch Series User Manual

41
 Select IRF from the navigation tree of Switch C to enter the page of the Setup tabFigure 29.
Figure 29 Configure a stack port on Switch C
 In the Port Settings area, select the check box before GigabitEthernet1/0/1.
 Click Enable.
Now, Switch C becomes a member switch.
# On Switch D, configure local port GigabitEthernet 1/0/1 connecting with Switch B as a stack port.
 Select IRF from the navigation tree of Switch D to enter the page of the Setup tab.

HP V1910 Switch Series Specifications

General

Brand	HP
Model	V1910 Switch Series
Category	Switch
Language	English