HP V1910 - Page 181

169
 Select Network  Voice VLAN from the navigation tree, and click the Port Setup tab to enter the page
shown in e.
e. Configure voice VLAN on GigabitEthernet 1/0/1
 Select Manual in the Voice VLAN port mode drop-down list.
 Select Enable in the Voice VLAN port state drop-down list.
 Type voice VLAN ID 2.
 Select GigabitEthernet 1/0/1 on the chassis front panel.
 Click Apply.
# Add OUI addresses to the OUI list.
 Click the OUI Add tab to enter the page shown in f.