Huawei ECC800-Pro - Page 106

Main
Menu
Second-
Level
Menu
Third-Level
Menu
Function Factory
Defaults
Restoration
a
Remarks
SNMP Yes SNMP version is
SNMPv3 by default.
SNMP port number is
161 by default.
Transparent
Transmission
Channel
Set the
transparent
transmission
function of the
device and upload
the network
security
certicate.
Yes Transparent
Transmission Through
COM Ports is Disable
by default.
Enable security
authentication is
Enable by default.
Device
Managem
ent
Device
Addition
Add devices or
replace the
security certicate
for device access.
No –
Security
Certication
Change
No –
Smart
Module
Cascading
– Cascade up to
three ECC800-Pros
through multi-
module
conguration.
Yes –
PUE
Congura
tion
– Set PUE
parameters.
Yes PUE Function is Enable
by default.
PUE conguration
mode is Standard by
default.
Linkage
Control
– Set PLC linkage
rules.
Yes –
Alarm
Parameter
s
Basic Alarm
Parameters
Set basic alarm
parameters and
alarm association
parameters.
Yes –
Alarm
Linkage
Yes –
Performa
nce
Parameter
s
Performance
Parameters
Enable or disable
the device
performance
statistics function.
Yes –
ECC800 Data Center Controller
User Manual (for ECC800-Pro) 4 UI Description
Issue 02 (2020-09-07) Copyright © Huawei Technologies Co., Ltd. 95