4. Tap Cancel to complete data collection, or tap Share to share the collected
data to other devices.
Step 2 Import facial data in oine mode.
1. Log in to the FusionModule app as an administrator.
2. On the main screen of the app, tap to go to the Settings screen. Select
Face Account Management, read the message, and tap OK. The Face
Account Management screen is displayed.
3. Tap Add to go to the Add screen.
4. Tap Import and select the facial
le that has been collected.
5. In the Message dialog box, enter the encryption password of the facial le.
6. Tap OK. The facial data is recorded.
Step 3 Associate the facial data.
1. Select an access actuator and a user to associate with the facial data.
2. Tap OK.
----End
6.13.3 Opening the Access Control System Using Facial
Recognition
Prerequisites
The facial data has been recorded.
Opening the Access Control System Using Facial Recognition
Method 1: When you open the access control system for the rst time, tap
on the FusionModule app login screen and align the face with the
green circle on the screen. After facial recognition is successful, log in to the app
as an administrator to open the access control system at the same time.
After you log in to the system using facial recognition, the system uses facial recognition
for user authentication the next time by default.
Method 2: Tap in the upper-left corner of the FusionModule app
home screen and align the face with the green circle on the screen. After facial
recognition is successful, log in to the app as an administrator to open the access
control system at the same time.
6.13.4 Maintaining the Facial Data
Prerequisites
The facial data has been recorded.
ECC800 Data Center Controller
User Manual (for ECC800-Pro) 6 Feature Description
Issue 02 (2020-09-07) Copyright © Huawei Technologies Co., Ltd. 234
To Next Page
Loading...
