Huawei ECC800-Pro - Remote Management; Neteco Management; Connecting a Communications Cable; Setting Neteco Parameters

Procedure
Step 1 Connect the PAD to the WiFi network of the ECC800-Pro in the room.
Step 2 Log in to the FusionModule app on the pad as an administrator.
Step 3 On the app home screen, tap
. On the displayed Settings screen, select Face
Account Management.
Table 6-50 Facial recognition management functions
Operation Purpose
Tap .
Modify the access actuator associated
with the user.
Tap .
Delete the facial data.
Step 4 Tap OK.
----End
6.14 Remote Management
6.14.1 NetEco Management
6.14.1.1 Connecting a Communications Cable
Procedure
Step 1 Connect a communications cable to the WAN1 port on the ECC800-Pro.
Figure 6-83 Connecting a communications cable
----End
6.14.1.2 Setting NetEco Parameters
When the smart module can be connected to the NetEco, perform the following
steps to congure parameters.
ECC800 Data Center Controller
User Manual (for ECC800-Pro) 6 Feature Description
Issue 02 (2020-09-07) Copyright © Huawei Technologies Co., Ltd. 235