Huawei ECC800-Pro - How Can I Export Fault Information

1. Specify Conguration le encryption password.
NO TE
Record the password for importing a conguration le.
2. Click Back Up Current Settings.
Step 4 Import a conguration le.
NO TICE
● Before importing the conguration le, ensure that the current system type is
the same as the system type when the
conguration le is exported.
● The ECC800-Pro_2 will restart after you import the conguration le.
1. Log in to the ECC800-Pro_2 WebUI as an administrator.
2. Choose Maintenance >
Conguration File.
3. Specify Conguration le decryption password.
4. Click Select File on the right of Import conguration le.
5. Select the
conguration le to be imported, and click Upload.
----End
8.1.19 How Can I Export Fault Information?
Procedure
Step 1 Log in to the ECC800-Pro WebUI as an administrator.
Step 2 Choose Maintenance > Fault Information.
Step 3 (Optional) Select Encryption password and enter an encryption password.
NO TICE
If Encryption Password is selected, the exported data package will be encrypted,
and you need to enter the encryption password to decompress the data package.
To ensure data security, you are advised to select Encryption password.
NO TE
Record the password for decompressing the data package.
Step 4 Export fault information and save the exported data to the PC or USB
ash drive.
ECC800 Data Center Controller
User Manual (for ECC800-Pro) 8 FAQ
Issue 02 (2020-09-07) Copyright © Huawei Technologies Co., Ltd. 323