Huawei ECC800-Pro - How Can I Open Doors Remotely over the ECC800-Pro Webui

Path Parameter Setting
NOTE
The setting
example indicates
that the device
connects to the
AI/DI_3 port on
the UIM1. If the
device connects to
another port,
enter the number
of the connected
port.
AI/DI_3
sensor type
Select the type of the device to be accessed
from the drop-down list box.
Monitoring >
System > UIM
Group > UIM1 >
Running
Parameters, click
Unhide All
Advanced
Signals, click
Power Supply
Parameters.
II power
supply
enable(COM
3/AIDI_3/
COM4/
AIDI_4)
The default value is Enable.
Step 3 After setting all mandatory parameters, click Submit.
----End
Follow-up Procedure
Choose Home > Plan View on the ECC800-Pro WebUI, and drag the dry contact
device to the corresponding position in the Smart Module View pane based on
the actual device layout.
8.1.33 How Can I Open Doors Remotely over the ECC800-Pro
WebUI?
Context
If O&M personnel need to enter a smart module but do not take an access cord or
forget the password, you can open the door remotely over the ECC800-Pro WebUI.
Procedure
Step 1 Log in to the ECC800-Pro WebUI as an administrator.
Step 2 Open the aisle door.
ECC800 Data Center Controller
User Manual (for ECC800-Pro) 8 FAQ
Issue 02 (2020-09-07) Copyright © Huawei Technologies Co., Ltd. 337