Huawei ECC800-Pro - Commissioning IPC6325 Camera (SD Card Configured)

Figure 6-34 Setting secondary stream 1 parameters
----End
Follow-up Procedure
Commission the other cameras by referring to this section.
6.5.4.2 Commissioning IPC6325 Camera (SD Card
Congured)
Context
If the VCN is not
congured and an SD card is chosen, perform the following
procedure.
Procedure
Step 1 Log in to the Huawei IPC WebUI.
1.
Congure the PC IP address and the camera IP address in the same network
segment. Enter the camera IP address (192.168.0.120 by default) in the
address bar of the Internet Explorer and press Enter.
2. Enter the preset user name admin and the preset password HuaWei123, and
click Log In.
ECC800 Data Center Controller
User Manual (for ECC800-Pro) 6 Feature Description
Issue 02 (2020-09-07) Copyright © Huawei Technologies Co., Ltd. 167