Huawei ECC800-Pro - Water Sensor; WLDS600 Water Sensor

Table 3-55 eLight actuator technical specications
Item Specications
Dimensions (L x W x
H)
112 mm x 76 mm x 35 mm
Power input DC input: terminal, with the input voltage of 24 V DC
Power output AC output: terminal, with the output voltage of 120 V
AC
RS485 port (RJ45) Two RS485 ports, support cascading
Installation Install on a guide rail
Operating
temperature
4°C–40°C
Ambient humidity 5%–95% RH (non-condensing)
3.2.15 Water Sensor
A water sensor detects water on the oor in real time and generates an alarm
when water is detected.
3.2.15.1 WLDS600 Water Sensor
The WLDS600 water sensor consists of a water detection cable, a water detector
with the BOM number of 33010556, an extension line, and a conversion cable.
ECC800 Data Center Controller
User Manual (for ECC800-Pro) 3 Device Description
Issue 02 (2020-09-07) Copyright © Huawei Technologies Co., Ltd. 61