Huawei ECC800-Pro - Electrode Water Sensor

Figure 3-31 WLDS900 water sensor
(1) Water detector (2) Conversion cable end A, connected to
the water detector
(3) Conversion cable
(4) Conversion cable
end B, connected to the
water detection cable
(5) Water detection cable end A,
connected to the conversion cable
(6) Water detection cable
Table 3-57 WLDS900 water sensor specications
Item
Specication
Operating
voltage
12 V DC (9–16 V DC)
Operating
temperature
–20°C to +70°C
Storage
temperature
–40°C to +85°C
Humidity 10%–80% RH (non-condensing)
3.2.15.3 Electrode Water Sensor
The electrode water sensor with the BOM number of 33010444 contains electrode
probes and cables.
ECC800 Data Center Controller
User Manual (for ECC800-Pro) 3 Device Description
Issue 02 (2020-09-07) Copyright © Huawei Technologies Co., Ltd. 64