Huawei ECC800-Pro - Setting ECC800-Pro Cascading

To Next Page

To Previous Page

changed parameters, and the numbers of parameters that are successfully

changed and failed to be changed are displayed beside Submit.

Step 4 Select the All Congured Data tab page to view the congured device

performance parameters.

----End

6.2 Setting ECC800-Pro Cascading

If multiple smart modules (≤ 3) are installed in the same room and the customer

has not deployed the NetEco, multiple ECC800-Pros can be cascaded for

management. To set the cascading function, follow the procedure in this section.

Prerequisites

Cascaded ECC800-Pros communicate with each other properly.

Context

A maximum of three ECC800-Pros can be cascaded. After the IP addresses of other

smart module ECC800-Pros in the room are added to an ECC800-Pro, their active

alarms and PUE data can be displayed and viewed.

You can click links on the cascading management page of the master ECC800-Pro

to display the login pages of the other ECC800-Pros. Then, you can log in to view

the details.

Procedure

Step 1 Log in to the ECC800-Pro WebUI as an administrator.

Step 2 Choose System Settings > Smart Module Cascading.

Step 3 Click Add. In the displayed New Smart Module Cascading dialog box, enter the

IP addresses of the ECC800-Pros to be cascaded.

Step 4 Click

Conrm.

Step 5 Choose Home > Multi-Module Monitoring. The information about the cascaded

ECC800-Pros is displayed.

ECC800 Data Center Controller

User Manual (for ECC800-Pro) 6 Feature Description

Related product manuals