Huawei ECC800-Pro - How Can I Open Skylights Remotely over the ECC800-Pro Webui

Table 8-54 Turning on or o aisle lights
Path Setting
Monitoring > Aisle > AC
Actuator Group > AC
Actuator n > Running
Parameters
Set Route 1 control mode to Light.
Set Set light mode to Manual.
Monitoring > Aisle > AC
Actuator Group > AC
Actuator n > Controls
Select Remote open scuttle, select ON or OFF as
required, and click Submit.
----End
Example
The following
gure shows how to turn on or o the lights controlled by AC
actuator 2.
Figure 8-38 Turning on or
o aisle lights
Follow-up Procedure
Set Set light mode to Automatic.
CA UTION
When a smart module actuator is congured, you need to set parameters for the
smart module actuator. The setting process is similar.
8.1.35 How Can I Open Skylights Remotely over the ECC800-
Pro WebUI?
Context
You can open skylights over the ECC800-Pro WebUI in emergencies.
ECC800 Data Center Controller
User Manual (for ECC800-Pro) 8 FAQ
Issue 02 (2020-09-07) Copyright © Huawei Technologies Co., Ltd. 339