Huawei ECC800-Pro - How Can I Turn on or off Aisle Lights in the Smart Module over the ECC800-Pro Webui

Table 8-53 Opening a door remotely
Path Setting
Monitoring > Aisle >
Access Actuator Group >
Access Actuator n >
Controls
Select Remote door opening and click Submit
CA UTION
● Remotely opening the door may open the smart module door, and this may
pose security risks. Exercise caution when performing this operation.
● When a smart module actuator is congured, you need to set parameters for
the smart module actuator. The setting process is similar.
----End
Example
The following
gure shows how to remotely open the aisle door controlled by
access actuator 1.
Figure 8-37 Opening a door remotely
8.1.34 How Can I Turn On or O Aisle Lights in the Smart
Module over the ECC800-Pro WebUI?
Context
● If O&M personnel forget to turn
o lights when exiting the data center, you
can remotely turn
o the lights over the ECC800-Pro WebUI.
● When the local light button is faulty or lights cannot be turned on through a
linkage, you can remotely turn on the lights over the ECC800-Pro WebUI.
Procedure
Step 1 Log in to the ECC800-Pro WebUI as an administrator.
Step 2 Turn on or o aisle lights.
ECC800 Data Center Controller
User Manual (for ECC800-Pro) 8 FAQ
Issue 02 (2020-09-07) Copyright © Huawei Technologies Co., Ltd. 338