6 Feature Description
6.1 Setting Device Performance Parameters
Context
● Setting device performance parameters will aect the storage of device
performance data.
● By setting the period for collecting device performance data, you can record
the performance data of the device running status.
● If you need to change parameters such as Collecting Data, refer to the
following procedure.
Procedure
Step 1 Choose System Settings > Performance Parameters.
Step 2 Set device performance parameters on the Performance Parameters page. Select
the device to be set under Device Type and click
Conrm. All performance
parameters of the selected device are displayed.
Figure 6-1 Performance parameter setting page
Step 3 Set device performance parameters, select the performance parameters to be
submitted in the
rst column, set Collecting Data, and click Submit. After the
parameters are successfully submitted,
is displayed in the setting result of the
ECC800 Data Center Controller
User Manual (for ECC800-Pro) 6 Feature Description
Issue 02 (2020-09-07) Copyright © Huawei Technologies Co., Ltd. 126
To Next Page
