Huawei ECC800-Pro - Elight Actuator

Figure 3-28 Smart U space manager
(1) Asset detection strip (2) Asset label (3) Main control box
Table 3-53 Technical specications of the smart U space manager
Item Specications
Characteristic Applicable to 42 U cabinets
Communications port RS485, Modbus-RTU
Communication Rate: 9600 bit/s
Communication format: one start bit, eight data
bits, no parity bit, one stop bit
Power input 12 V DC±5% (RJ45)
Rated current and power
consumption
250 mA
Data upload port One RS485 route (two RJ45 ports)
Dimensions (mm) Main control box: 71 mm x 70 mm x 25 mm
Detection strip: 1867 mm x 18 mm x 6.5 mm (H
x W x D)
Weight ≤ 0.2 kg (main control box), ≤ 0.35 kg (asset
detection strip)
Installation mode Magnet-based installation
3.2.14 eLight Actuator
The eLight actuator has the function of associating alarms, access authorization
status, and atmospheres.
ECC800 Data Center Controller
User Manual (for ECC800-Pro) 3 Device Description
Issue 02 (2020-09-07) Copyright © Huawei Technologies Co., Ltd. 59