Huawei ECC800-Pro - Configuring Event Notification

● Currently, commissioning wizard is provided for the following functions:
Smart Module Settings, Basic Param Settings, Add Devices, Add Sensor,
Plan View, Power Dist Settings, Temp Control Settings, Linkage Test,
Video Settings, and Access Management.
Procedure
Step 1 Log in to the ECC800-Pro WebUI as an administrator.
NO TE
The conguration wizard is displayed when you log in to the ECC800-Pro WebUI for the rst
time or the system type is switched.
Step 2 Choose Maintenance > Conguration Wizard to access the parameter
conguring page for the deployment wizard.
Step 3
Congure related parameters on the page as instructed. For details, see the
function description on the left of the page.
NO TE
● In the process, click Previous, Next, and Skip as required.
● To exit before the
conguration is complete, click Finish to terminate the conguration
directly.
Step 4 After conguring the parameters, click Finish.
Step 5 After conrming that the commissioning Result is normal, enter the Checker
Name and Check Date, and click Conguration Completed.
NO TE
To export the conguration result, click Export Check Result. The export le format is csv.
----End
5.4
Conguring Event Notication
You can set alarm notication by email or SMS as required. Information about a
maximum of 20 users who will receive alarm
notication can be displayed.
Prerequisites
To implement alarm
notication by SMS, the following conditions must be met:
● The ECC800-Pro is
congured with a 4G module and supports 2G/3G/4G SIM
card access.
ECC800 Data Center Controller
User Manual (for ECC800-Pro) 5 Power-On Commissioning
Issue 02 (2020-09-07) Copyright © Huawei Technologies Co., Ltd. 107