Huawei ECC800-Pro - Smart Module Actuator

Indi
cato
r
Color Name Operat
ion
Status Description
O The system is normal.
3.2.5 Smart Module Actuator
The smart module actuator is applied in a smart module. It controls the lighting
inside the smart module through the access control system, host instructions,
infrared linkage information (disabled by default), or lighting button, and provides
a pad charging port. The smart module actuator can also control the rotating
skylight of the aisle based on the
re alarm linkage information or the host
control information, and opens the magnetic lock when detecting the card swiping
information of the card reader, exit button information, and
re linkage
information. In addition, the smart module actuator manages access rights,
records entrance and exit events, and records alarms.
Appearance
Figure 3-20 Smart module actuator
(1) 48 V DC power
input port
(2) LAN port (3) RS485 ports
(COM1/COM2)
(4) RS485 port (reserved)
(5) DIP switch (6) AC OUT power
output ports
(7) Terminal cover (8) AC IN power input
port
(9) Fuse (10) DO/DI ports (11) DO/12V port (12) AI/DI ports
ECC800 Data Center Controller
User Manual (for ECC800-Pro) 3 Device Description
Issue 02 (2020-09-07) Copyright © Huawei Technologies Co., Ltd. 44