Huawei ECC800-Pro - Intelligent Battery Monitoring System

Item Specications
IP rating IP20
Indicator Communication indicator and running indicator
Color Black
Address setting Supports Modbus address setting
3.2.21 Intelligent Battery Monitoring System
The intelligent battery monitoring system consists of the iBOX and iBAT (BIM).
The iBOX is an intelligent battery management module that collects wireless
communication data from the downstream iBAT groups, collects and analyzes the
operating data of battery strings, calculates state of charge (SOC) and state of
health (SOH) of batteries and battery strings and estimates the battery health
status accordingly, supports battery tripping management, and uploads data to
the management unit through COM or PoE ports.
The iBAT is a battery monitoring module that monitors the voltages, internal
resistances, and pole temperatures of batteries.
In the scenario with battery cabinets, the iBOX is installed inside a smart module
battery cabinet and the iBOX communications cable connects to a smart ETH
gateway.
(Optional) When a battery system needs to be managed by multiple iBOXs, the
iBOXs can be connected to northbound devices using straight-through cables (the
ECC800-Pro supports four iBOXs in parallel through the smart ETH gateway)
without cascading.
ECC800 Data Center Controller
User Manual (for ECC800-Pro) 3 Device Description
Issue 02 (2020-09-07) Copyright © Huawei Technologies Co., Ltd. 77