Huawei ECC800-Pro - Page 167

Settings Procedure
Enable TLS 1.1 or TLS 1.2.
NOTE
You must enable TLS 1.1 or TLS 1.2
when the HTTPS protocol is used to
access the camera. Otherwise, the
camera WebUI cannot be opened.
1. Choose Tools > Internet
Options.
The Internet Options dialog box
is displayed.
2. Click the Advanced tab.
3. Select Use TLS 1.1 or Use TLS
1.2.
4. Click OK.
Set Use Pop-up Blocker to Disable. 1. Choose Tools > Internet
Options.
The Internet Options dialog box
is displayed.
2. Click the Security tab.
3. Select Internet.
4. Click Custom level.
The Security Settings-Internet
Zone dialog box is displayed.
5. Set Use Pop-up Blocker to
Disable.
6. Click OK.
5. Choose View > Network/Time > Second Protocol Parameters, and select
Enable ONVIF.
ECC800 Data Center Controller
User Manual (for ECC800-Pro) 6 Feature Description
Issue 02 (2020-09-07) Copyright © Huawei Technologies Co., Ltd. 156