Huawei ECC800-Pro

To Next Page

To Previous Page

Procedure

Step 1 Log in to the ECC800-Pro WebUI as an administrator, and check whether the

device exists on the Monitoring page.

The following is an example of conrming the access of a WiFi converter.

● If the device exists, and communication status is normal, the device has

accessed the ECC800-Pro successfully.

Figure 8-32 Device accessed the ECC800-Pro

● If the device does not exist, check that the cable is properly connected

between the device and the ECC800-Pro and that the device and ECC800-Pro

are operating properly.

----End

Follow-up Procedure

Choose Home > Plan View on the ECC800-Pro WebUI, and drag the device to the

corresponding position in the Smart Module View pane based on the actual

device layout.

ECC800 Data Center Controller

User Manual (for ECC800-Pro) 8 FAQ

Huawei ECC800-Pro - Page 340