92 Issue 3.3.2 / April, 2011
Program 05-16-IP : System Timing Parameters – 16
05-16-IP SYS PAR
0 0 0 0 0 0 0 0
IP = 01-08
System Default.
Item Display Programming Data Timing
Pointer Data Description Table Default
---------- ---------- ----------------------------------------------------------- ---------- ------------
01 0-1 Midnight Reset 0=Disable
02 0-1 Reserved 0=
03 0-8 DISA Single Digit Dialling Level 0=One Level
04 0-8 VMU language Service 0=Disable
05 0-9 Reserved 0=
06 0-1 Reserved 0=
07 0-3 ACP data output format 0= CTI
08 0-3 Reserved 0=
Description:
01. Midnight Reset:
The Midnight reset parameter will restart the system at midnight and clear all Ram. If set to 2 it will also
force any VM ports to clear.
0 = Disable 1 = Enable 2 = Enable & if VM Locks Up will cut off at normal time.
02. Reserved
03. DISA Single Digit Dialling Level:
0 = One level. System plays VMU standard greeting after DISA answers the incoming call. Users
can dial either the extension number or the single digit service.
1 = Two levels. When incoming call rings in to the system, the external party will hear the “Company
Greeting to announce “Press 1 to access different department by single digit service””.
2= Two levels. When incoming call rings in to the system, the external party will hear the “Company
Greeting to announce “Press 2 to access different department by single digit service””.
8= Two levels. When incoming call rings in to the system, the external party will hear the “Company
Greeting to announce “Press 8 to access different department by single digit service””.
04. VMU Language service:
This enables two language service for VMU.
0 = Feature is disabled.
1 = Press 1 to select second language service.
2 = Press 2 to select second language service.
…………….
8 = Press 8 to select second language service.
9= Company greeting + second language (exp:day+2
nd
day,Night+2
nd
Night…)
To Next Page
Loading...