G1E Programming Manual
109
06. G1E Monitor Output:
This parameter enables/disables the G1E monitor RS232 output
0 = disable output monitor to RS-232 1 = enable output monitor to RS-232
07. G1E Monitor DSP trace:
This parameter enables/disables the G1E monitor DSP (Digital Signal Processor) Trace
0 = Disable
1 = enable monitor DSP trace
2 = monitor DSP Write Codec & download External program
3 = enable monitor DSP trace, monitor DSP Write Codec & download External program
08. G1E Monitor VMC Trace:
This parameter enables /disables the G1E monitor VMC (Voice Mail Card) trace.
0 = Disable 1 = enable monitor VMC trace
2 = enable monitor VMC R/W CF card pointer table & download External program
3 = enable monitor VMC trace enable monitor VMC R/W CF card pointer table & download
External program
To Next Page
Loading...
