G1E Programming Manual
121
06. Number of records between the Title:
This parameter permits the assignment of the number of records between each Title. If the Number = 00, The
whole SMDR feature will be disabled.
07. Reserved:
08. Polarity Reversal / Mini Call Accounting:
If reversal is disabled, the system will start the call timer after accessing a CO line.
If reversal is enabled, the system will start the call timer after the called party answers.
0= Not Detect P.R. / Normal SMDR format output
1= Detect P.R. / Normal SMDR format output
2= Not Detect P.R. / Simple SMDR format output
3= Detect P.R. / Simple SMDR format output
4 = Mini Call Accounting G21648 only.
* If the Mini-Accounting Feature has been enabled, the system will not record the call without any meter pulses
being received.
* When the Mini Call Accounting feature is enabled it is necessary to set Administration phones to not record
calls against them in Mode 45-st-08. This will prevent the system memory from being used to record calls
unnecessarily. If administration phones are allowed to record their calls and are not checked out regularly then
they will fill the system memory and prevent other calls being recorded. The G1E can store up to 350 records.
To Next Page
Loading...