182 Issue 3.3.2 / April, 2011
Program 95-tk-IP : Trunk Specifications – 3
95-tk-IP TK SPEC
0 0 0 0 0 0 0 0
tk = 01-12, IP = 01-08
System Default
Item Display
Pointer Data Programming Data Description Default
-------- ---------- ------------------------------------------------ -------------
01 0-1 Detect Fax Signal 0=Disable
02 0- Reserved 0=
03 0-8 Trunk Call Duration 0= Disable
04 0-8 DISA and ECF – Lunch Time Delay 0=No
05 0- Reserved 0=
06 0-9 Duet (Distinctive Ring) Setting 0=No Duet
07 0- Reserved 0=
08 0- Reserved 0=
General:
This program permits each trunk line to be assigned different parameters.
Description:
01. Detect Fax signal
This parameter enables a line to detect the Fax CNG tone and if present the line will be transferred to the SLT
port that is allocated as a fax port in Mode 43-cn-02.
Once the SLT port is set as a Fax port (43-CN-02 = T )press [MSG] for T then enable DISA for that line and Fax
detection will be enabled.
0 = Disable 1 = enable
Owing to difficulties with certain types of fax machines this feature is not supported or recommended.
02. Reserved:
03. Trunk Call duration:
This parameter enables the ability to control the length of individual calls on each trunk to the settings as follows
0 = No cutoff 1 = 3 Mins 2 = 5 Mins 3 = 10 Mins 4 = 15 Mins …… 8 = 50 Mins.
04. DISA and ECF Lunch Time setting:
During Lunch time setting the system will follow the settings for DISA or ECF night set in Mode 35-tk-03/04 if the
following settings are set to either DISA or ECF. If set at default (0) then no DISA or ECF will take place even if
ECF or DISA is set for night time.
0 = Disable 1 = DISA 2 = ECF
To Next Page
Loading...
