G1E Programming Manual
71
05. Name Function:
This parameter enables the naming feature for trunks, extensions and speed dials.
Features \ Values 0 1 2 3 5 7
Display Name instead of number
for Extension
V V V V
Directory Dial for Speed Dial V V V
Directory Dial for Extension V V
V: The feature is enabled.
Note 1: When any of the above features are enabled the total number of speed dial sets will
be reduced. See Mode 05-04-06.
Note 2: For setting name for Extension/Speed dial/Trunk, Please refer to the programming mode
43 / 09 /35.
Note 3: For setting “Directory Dial” key, Please refer to mode 07.
06. Reserved:
07. Auto Redial Times:
This parameter is to set the number of auto redial times which the system will attempt.
0 = 0 times 1 = 2 times 2 = 5 times 3 = 9 times 4 = 19 times
5 = 29 times 6 = 39 times 7 = 49 times 8 = 59 times 9 = 69 times.
08. Auto Redial Pause Time:
This parameter is the time duration between the system hanging up an auto redial attempt and starting
to redial automatically.
0 = 10 Sec. 1 = 20 Sec. 2 = 30 Sec. .......... 9 = 100 Sec.
Off Hook
Auto-Redial Pause Time
(Program 05-05-08), Y
seconds
Off Hook
Auto-Redial Ringing Timer
On Hook
Auto-Redial Ringing Timer
To Next Page
Loading...