94 Issue 3.3.2 / April, 2011
Program 05-17-IP : System Timing Parameters – 17
05-17-IP SYS PAR
0 1 0 0 0 0 0 0
IP = 01-08
System Default.
Item Display Programming Data Timing
Pointer Data Description Table Default
---------- ---------- ----------------------------------------------------------- ---------- ------------
01 0-1 DSP Trunk Conference (not recommended) 0=Disable
02 0-1 VMU Compression 1=32k
03 0-1 DISA Transfer Announce Extension Number 0=No
04 0-8 DISA & ECF Access Delay Time - Lunch 0=0
05 0-9 DTMF CID Leading Digits 0=None
06 0-1 DTMF CID Trailing Digits 0=None
07 0-2 CID Call Block or Transfer to Voicemail 0= No
08 0-3 Minimum Mailbox Record Time 0=Disable
Description:
01. DSP Trunk Conference:
This parameter enables the use of the DSP chip to provide a trunk conference. This is not a
recommended feature as performance is not perfect.
0 = Disable 1 = Enable
02.VMU Compression:
The default setting for the VMU is 32KBPS compression rate. For customers who want to increase the
recording capacity this parameter allows the compression rate to be cut back to 16 KBPS. This will
double the available amount of storage time on the VMU with a decrease in Voice quality. The
disadvantage with a 256Mb CF card is that the minimum message length will be doubled so there may
be no useful increase. 64KBPS is available from E52y software.
0 = 16KBPS 1 = 32KBPS 2 = 64KBPS
03. DISA Transfer Announce Extension Number:
When DISA transfers a call it will announce the extension number if this parameter is enabled.
0 = Disable 1 = Enable
04. DISA & ECF Access Delay Time – Lunch Mode:
This parameter sets the time duration that a DISA / ECF trunk will ring prior to connection to the voice
message during Lunch time. Stations can answer during this time.
0 = Automatic connection, no ring to the stations.
1-8 = Automatic connection after 2-254 seconds ringing.
See timing table grade C for parameters for this feature.
See mode 05-01-04 for Day delay time and 05-11-04 for Night Delay time.
To Next Page
Loading...